Centsys D6 Smart Sliding Gate Motor

Mechanical Features

• Lockable, easy manual override
• Top speed of up to 36m per minute
• Custom engineered gearbox moulded from corrosion proof, durable polymer
• Excellent cable management for an installation that is both neat and flexible
• SMART height adjustment ensuring a correct installation is easily achieved
• Easy access to bolts
• Ingenious component assembly literally clicks together in a neat and sturdy manner
• Two dedicated accessory trays hold accessories firmly in place and provide quick and easy access to wiring
• High security, irreversible steel gearset

Electronic Features

• Interactive graphic user interface via a smartphone application
• Automated setup of gate endpoints (limits)
• Independently adjustable motor speed in both opening and closing directions
• Fail safe collision detection and auto reverse (adjustable sensitivity)
• Smooth, adjustable start/stop (ramp up/ramp down)
• Multiple operational modes
• Anti tamper vibration sensor
• Selectable, adjustable autoclose
• Pedestrian (partial) opening
• Positive close mode
• Advanced diagnostics
• Independent safety inputs for opening and closing beams
• Automatic beam test for both opening and closing beams
• Advanced lightning/surge protection
• Intelligent management and labelling of remote controls
• On board NOVA code hopping radio receiver with full channel mapping capability (limited to 1500 remotes)
• Gatemaster Australia recommends the installation of photo beams as a safety precaution.

• 1 x D6 Smart Operator
• 1 x Low Voltage Smart Charger
• 1 x 3 Pin Plug
• 2 x Centsys multi channel transmitters
• 1 x foundation plate
• 1 x fastener kit
• 2 x release keys
• Please Note: this motor requires 2 x 7.2ah batteries to operate (NOT INCLUDED)

• Input Voltage: 90V - 240V AC +/-10% @ 50Hz
• Current consumption (Mains): 430mA
• Battery charger current output: 1.3A
• Maximum number of operations per day: 150
• Duty cycle - Mains present: Continuous
• Motor voltage: 24V DC
• Motor power supply: Battery-driven (Standard Capacity - 2x12V)
• Current consumption (motor at rated load): 13A
• Input / Output sink currents (Max accessory current draw): I/O 1-4 - 100mA (12/24V), I/O 5 and 6 - 3A (12/24V) 10sec Pulse
• Motor push force - starting: 30kgf
• Motor push force - rated: 17kgf
• Gate mass - maximum: 600kg
• Gate length - maximum: 100m
• Gate speed (varies with load): 36m/min @ 17kgf
• Manual Override: Lockable with key release
• Operations in standby with 2 x 7Ah (28W) battery: Half day - 209 (Power Saving) / 102 (Normal), Full Day - 183 (Power Saving) / 79 (Normal)
• Collision Sensing: Electronic
• Operating temperature range: -15°C to +50°C
• On-board receiver type: Code-hopping multichannel receiver with selective add and delete
• Receiver code storage capacity: 1500 Remotes
• Receiver frequency: 433.92MHz
• Degree of protection: IP55

See D6 Smart Installation Manual here.

See Low Voltage Smart Charger Manual here.